Endress+Hauser Proline 200 PROFIBUS PA, Brief Operating Instructions

Page: 30 / 32

Commissioning Proline 200 PROFIBUS PA
30 Hauser
Wizard Meaning
Low flow cut off Set the low flow cut off
Partially filled pipe detection Configure partial and empty pipe detection
Current input Configure the current input
8.5 Defining the tag name
To enable fast identification of the measuring point within the system, you can enter a unique
designation using the Device tag parameter and thus change the factory setting.
1 XXXXXXXXX
A0029422
 4 Header of the operational display with tag name
1 Tag name
Navigation
"Setup" menu → Device tag
Parameter overview with brief description
Parameter Description User entry Factory setting
Device tag Enter the name for the
measuring point. Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /). Promass 200
8.6 Protecting settings from unauthorized access
The following write protection options exist in order to protect the configuration of the
measuring device from unintentional modification:
• Protect access to parameters via access code
• Protect access to local operation via key locking
• Protect access to measuring device via write protection switch
For detailed information on protecting the settings against unauthorized access, see the
Operating Instructions for the device.