Endress+Hauser PROFIBUS-DP, Operating Instructions Manual

Page: 33 / 52

SmarTec S CLD 132 PROFIBUS-PA/-DP Operation
Hauser 33
Analog Input block
There are two Analog Input Blocks in the SmarTec S transmitter. These are distributed
to slots 1 and 2 in the following order:
1. Main measured value (Main Process Value)
2. Temperature measured value (Temperature)
Parameter E+H
matrix
(CW II) Slot Index Size
(bytes)
Type Acc. Store
Standard parameters
BLOCK_OBJECT 1 - 2 16 20 DS-32* r C
ST_REV 1 - 2 17 2 Unsigned16 r N
TAG_DESC 1 - 2 18 32 Octetstring r, w S
STRATEGY 1 - 2 19 2 Unsigned16 r, w S
ALERT_KEY 1 - 2 20 1 Unsigned8 r, w S
TARGET_MODE 1 - 2 21 1 Unsigned8 r, w S
MODE_BLK
Actual
Permitted
Normal 1 - 2 22 3 DS-37*
Unsigned8
Unsigned8
Unsigned8 r
N
Cst
Cst
ALARM_SUM 1 - 2 23 8 DS-42* r D
BATCH 1 - 2 24 10 DS-67* r, w S
Gap 1 - 2 25
Block parameters
OUT 1 - 2 26 5 DS-33* r D
PV_SCALE 1 - 2 27 8 Float r, w S
OUT_SCALE 1 - 2 28 11 DS-36* r, w S
LIN_TYPE 1 - 2 29 1 Unsigned8 r, w S
CHANNEL 1 - 2 30 2 Unsigned16 r, w S
PV_FTIME 1 - 2 32 4 Float r, w S
FSAFE_TYPE 1 - 2 33 1 Unsigned8 r, w S
FSAFE_VALUE 1 - 2 34 4 Float r, w S
ALARM_HYS 1 - 2 35 4 Float r, w S
HI_HI_LIM 1 - 2 37 4 Float r, w S
HI_LIM 1 - 2 39 4 Float r, w S
LO_LIM 1 - 2 41 4 Float r, w S
LO_LO_LIM 1 - 2 43 4 Float r, w S
HI_HI_ALM 1 - 2 46 16 DS-39* r D
HI_ALM 1 - 2 47 16 DS-39* r D
LO_ALM 1 - 2 48 16 DS-39* r D
LO_LO_ALM 1 - 2 49 16 DS-39* r D
SIMULATE 1 - 2 50 6 DS-50* r, w S
VIEW_1 1 - 2 61 18 Unsigned8 r D