Proline Promag 53 PROFIBUS DP/PA
Accessories
Hauser
133
8.2
Measuring principle-specific accessories
Accessory
Description
Order code
Mounting kit for
Promag 53 transmitter
Mounting kit for wall-mounted housing (remote version).
Suitable for:
• Wall mounting
• Pipe mounting
• Panel mounting
Mounting set for aluminum housings. Suitable for:
• Pipe mounting
DK5WM - *
Cable for remote version
Coil and signal cables, various lengths. Reinforced cable
on request.
DK5CA - * *
Ground cable for
Promag W/P
A set consists of two ground cables.
DK5GC - * * *
Ground disk for
Promag W/P
Ground disk for potential matching
DK5GD * * *
Mounting kit for Promag H
Mounting kit for Promag H, comprising:
– 2 process connections
– Screws
– Seals
DKH * * - * * * *
Adapter connection for
Promag A, H
Adapter connections for installing Promag 53 H instead of
Promag 30/33 A or Promag 30/33 H DN 25.
DK5HA - * * * * * *
Ground rings for Promag H
If the process connections are made of PVC or PVDF,
ground rings are necessary to ensure that potential is
matched. A set comprises 2 ground rings.
DK5HR - * * * *
Set of seals for Promag H
For regular replacement of the seals of the Promag H
sensor.
DK5HS - * * *
Wall-mounting kit for
Promag H
Wall-mounting kit for the Promag H sensor.
DK5HM - * *
Welding jig for Promag H
Weld nipples as process connection:
Welding jig for installation in pipes.
DK5HW - * * *
