Commissioning
Micropilot S FMR540 4 to 20 mA HART
56
Hauser
6.5
Basic Setup with the Hauser operating program
To carry out the basic setup with the operating program, proceed as follows:
• Start the operating program and establish a connection
• Select the "
basic setup
" function group in the navigation window
The following display appears on the screen:
Basic Setup step 1/4:
• Status image
• Enter the measuring point description (TAG number).
MicropilotS-en-011
• The "
Next
" button moves you to the next screen display.
!
Note!
Each parameter that is changed must be confirmed with the
return
key!
