Endress+Hauser Micropilot FMR50, Operating Instructions Manual

Page: 86 / 184

Repairs Micropilot FMR51, FMR52 HART
86 Hauser
14.2 Spare parts
• A few interchangeable measuring device components are identified by a spare part
nameplate. This contains information about the spare part.
• The connection compartment cover of the device contains a spare part nameplate that
includes the following information:
– A list of the most important spare parts for the measuring device, including their
ordering information.
– The URL for the W@M Device Viewer ( www.endress.com/deviceviewer ):
There, all spare parts for the measuring device are listed, including the order code, and
can be ordered. If available, the corresponding Installation Instructions can also be
downloaded there.
002847-A
Spare parts for: Levelflex FMP5x
Ser.-no.:
8A21AC098AF4
Cover (front)
Cover (right)
IO module
Display
Sensor
Pos. no.
1
2
3
4
5
6
Spare part Spare no./structure
Main electr.
Additional information: www.endress.com/deviceviewer
71023451
XPF0001-
XPF0002- / XPF0003-
71023451 71023451
71023451
71023451
3
4
1
5
2
6
A0014979
 24 Example for spare part nameplate in connection compartment cover
Measuring device serial number:
• Is located on the device and spare part nameplate.
• Can be read out via the "Serial number" parameter in the "Device information"
submenu.
14.3 Return
The measuring device must be returned if it is need of repair or a factory calibration, or if
the wrong measuring device has been delivered or ordered. Legal specifications require
Hauser, as an ISO-certified company, to follow certain procedures when handling
products that are in contact with the medium.
To ensure safe, swift and professional device returns, please refer to the procedure and
conditions for returning devices provided on the Hauser website at
http://www.endress.com/support/return-material
14.4 Disposal
Observe the following notes during disposal:
• Observe valid federal/national regulations.
• Ensure proper separation and reuse of the device components.