Endress+Hauser Micropilot FMR50, Operating Instructions Manual

Page: 146 / 184

Operating menu Micropilot FMR51, FMR52 HART
146 Hauser
Switch-on delay 
Navigation  Setup → Advanced setup → Switch output → Switch-on delay
Prerequisite • Switch output function (→  143) = Limit
• Assign limit (→  144) ≠ Off
Description Define switch-on delay.
User entry 0.0 to 100.0 s
Factory setting 0.0 s
Switch-off value 
Navigation  Setup → Advanced setup → Switch output → Switch-off value
Prerequisite Switch output function (→  143) = Limit
Description Enter measured value for the switch-off point.
User entry Signed floating-point number
Factory setting 0
Additional information The switching behavior depends on the relative position of the Switch-on value and
Switch-off value parameters; description: see the Switch-on value parameter
(→  144).
Switch-off delay 
Navigation  Setup → Advanced setup → Switch output → Switch-off delay
Prerequisite • Switch output function (→  143) = Limit
• Assign limit (→  144) ≠ Off
Description Define switch-off delay.
User entry 0.0 to 100.0 s
Factory setting 0.0 s