Installation Instruction
Main electronic module
Levelflex FMP5x, Micropilot FMR5x
EA00041F/00/A2/15.14
71248975
Instruction is valid for the following spare part sets:
Confirmation whether the spare part is permitted to be used with the measuring device
The spare parts set and Installation Instructions are used to replace a faulty unit with a functioning unit of the same type.
Use genuine parts from Hauser only.
Only original spare parts supplied by Hauser shall be used with the measuring device. Therefore, before use, check whether the spare
part set is compatible with the measuring device.
A spare parts overview label is located in the connection compartment cover of the measuring device. If there is no label or the spare part is not
listed the appropriate spare part can also be identified via W@M Device Viewer.
How carrying out such a check via the W@M Device Viewer is described below:
Order number
Device component
XPF0001 - ###...
Main electronic module for Levelflex FMP5x
XPF0020 - ###...
Main electronic module for Micropilot FMR5x
We recommend that the Installation Instructions be kept with the packaging at all times.
Choose the Hauser Device Viewer via web browser: www.endress.com/deviceviewer
Enter the serial number (Ser. No.) of the device into the W@M Device Viewer, then click on "Spare parts".
The list of the available spare parts for the device is displayed.
Check the order number on the packaging label of the spare part set.
Check whether the order number of the spare part set is specified in the list displayed by the device viewer:
=
YES,
the spare part can be used.
=
NO
, the spare part may
not
be used.
www.endress.com/deviceviewer
Device Viewer
Ser. No.:12345
i
i
Ser.No.:1234567890
Ser. No.:12345
=
?
71248975
