manualshive.com logo in svg

Endress+Hauser Micropilot FMR20, Operating Instructions Manual, Page: 76 / 102

Share
Download
Endress+Hauser Micropilot FMR20 Operating Instructions Manual Download Page 76

Operating menu

Micropilot FMR20 HART

76

Hauser

15.3   "Setup" menu

•

 : Indicates navigation to the parameter via operating tools

•

 : Indicates parameters that can be locked via the access code.

Navigation

Setup

Device tag

Navigation

Setup → Device tag

Description

Enter a unique name for the measuring point to identify the device quickly within the

plant.

User entry

Character string comprising numbers, letters and special characters (#32)

Factory setting

EH_FMR20_####### (last 7 digits of the device serial number)

Distance unit

Navigation

Setup → Distance unit

Description

Used for the basic calibration (Empty / Full).

Selection

SI units

m

US units

ft

Empty calibration

Navigation

Setup → Empty calibr.

Description

Distance between process connection and minimum level (0%).

User entry

0.0 to 20 m

Factory setting

Depends on the antenna version

Full calibration

Navigation

Setup → Full calibr.

Description

Distance between minimum level (0%) and maximum level (100%).

Summary of Contents for Micropilot FMR20







































































































Reviews:

No comments