manualshive.com logo in svg

Endress+Hauser Micropilot FMR20, Operating Instructions Manual, Page: 14 / 102

Share
Download
Endress+Hauser Micropilot FMR20 Operating Instructions Manual Download Page 14

Installation

Micropilot FMR20 HART

14

Hauser

5  

Installation

5.1  

Installation conditions

5.1.1  

Installation types

B

C

D

A

F

E

  A0045309

 3

Wall, ceiling or nozzle installation

A

Wall or ceiling mounting, adjustable

B

Mounted at rear thread

C

Horizontal installation in cramped spaces

D

Ceiling installation with counter nut (included in delivery)

E

Installation with adjustable flange seal

F

Installation with FAU40 alignment unit

Caution!

• The sensor cables are not designed as supporting cables. Do not use them for

suspension purposes.

• Always operate the device in a vertical position in free-space applications.

5.1.2  

Nozzle installation

The antenna should project out of the nozzle for optimum measurement. The interior of

the nozzle must be smooth and may not contain any edges or welded joints. The edge of

the nozzle should be rounded if possible.

Summary of Contents for Micropilot FMR20







































































































Reviews:

No comments