Repair
Memosens COS81E
28
Hauser
10
Repair
10.1 General information
‣
Only use spare parts from E Hauser to guarantee the safe and stable
functioning of the device.
Detailed information on the spare parts is available at:
www.endress.com/device-viewer
10.2 Return
The product must be returned if repairs or a factory calibration are required, or if the
wrong product was ordered or delivered. As an ISO-certified company and also due to legal
regulations, Hauser is obliged to follow certain procedures when handling any
returned products that have been in contact with medium.
To ensure the swift, safe and professional return of the device:
‣
Refer to the website
www.endress.com/support/return-material
for information on the
procedure and conditions for returning devices.
The product must be returned if repairs or a factory calibration are required, or if the
wrong product was ordered or delivered.
To ensure safe, professional and swift product returns, please contact your local Sales
Center for information on the procedure to be followed and general conditions.
10.3 Spare parts
Parts of the sensor are subject to wear during operation. By taking suitable measures, you
can restore the normal operating function.
Corrective action
Reason
Replace process seals
Visible damage to a process seal
Replace spot cap
• Luminescence layer is damaged or can no longer be cleaned
• Visible damage to the O-ring
Summary of Contents for Memosens COS81E
Page 2: ......
