background image

About this document

Memosens COS51E

4

Hauser

1  

About this document

1.1  

Warnings

Structure of information

Meaning

L

DANGER

Causes (/consequences)

If necessary, Consequences of
non-compliance (if applicable)

Corrective action

This symbol alerts you to a dangerous situation.
Failure to avoid the dangerous situation 

will

 result in a fatal or serious

injury.

L

WARNING

Causes (/consequences)

If necessary, Consequences of
non-compliance (if applicable)

Corrective action

This symbol alerts you to a dangerous situation.
Failure to avoid the dangerous situation 

can

 result in a fatal or serious

injury.

L

CAUTION

Causes (/consequences)

If necessary, Consequences of
non-compliance (if applicable)

Corrective action

This symbol alerts you to a dangerous situation.
Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of
non-compliance (if applicable)

Action/note

This symbol alerts you to situations which may result in damage to
property.

1.2  

Symbols used

Symbol

Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

Result of a step

1.2.1  

Symbols on the device

Symbol

Meaning

Reference to device documentation

Do not dispose of products bearing this marking as unsorted municipal
waste. Instead, return them to the manufacturer for disposal under the
applicable conditions.

Summary of Contents for Memosens COS51E

















































Reviews: