Endress+Hauser LT5 Operating Instructions Manual Download Page 14

Page: 14 / 96

Incoming acceptance and product identification

LT5

Hauser

4.3

Manufacturer contact address

Hauser Yamanashi Co., Ltd.

406-0846

862-1 Mitsukunugi, Sakaigawa-cho, Fuefuki-shi, Yamanashi

4.4

Storage and transport

4.4.1

Storage conditions

• Storage temperature: –20 to +70 °C (–4 to 158 °F)

• Store the device in its original packaging.

4.4.2

Transport

NOTICE

The housing may become damaged or dislodged.

Risk of injury

‣

Transport the device to the measuring point in its original packaging or hold it by the

process connection.

‣

Do not fasten lifting devices (hoisting slings, lifting eye bolts, etc.) at the housing;

instead, secure them to the process connection. Take into account the center of gravity

of the device in order to avoid unintended tilting.

‣

Comply with the safety instructions and transport conditions for devices over

18 kg (39.6 lbs) (IEC61010).

NOTICE

Risk of injury

‣

Transport the measuring device to the measuring point in its original packaging.

‣

Take into account the center of gravity of the device in order to avoid unintended

tilting.

‣

Comply with the safety instructions and transport conditions for devices over

18 kg (39.6 lbs) (IEC61010).

Summary of Contents for LT5

































































































Search results

Summary of Contents for LT5

Reviews:

Related manuals for LT5

Brands by name

Popular brands

Endress+Hauser LT5, Operating Instructions Manual

Search results

Summary of Contents for LT5

Reviews:

Related manuals for LT5

Brands by name

Popular brands