manualshive.com logo in svg

Endress+Hauser Liquistation CSF39, Operating Instructions Manual

Share
Download
Endress+Hauser Liquistation CSF39 Operating Instructions Manual Download Page 43

Liquistation CSF39

System integration

Hauser

43

3. Operate the Liquiline via the HART device. To do so, follow the instructions in the

manual.

More detailed information on HART communication is provided on the product pages

on the Internet (→ BA00486C).

7.3.2  

PROFIBUS DP

With the fieldbus module 485 and the appropriate device version, you can communicate

via PROFIBUS DP.

‣

Connect the PROFIBUS data cable to the terminals of the fieldbus module as described .

For detailed information on "PROFIBUS communication", see the product pages on the

Internet (→ SD01188C).

7.3.3  

Modbus

With the fieldbus module 485 and the appropriate device version, you can communicate

via Modbus RS485.
You use the BASE2 module for Modbus TCP.
The RTU and ASCII protocols are available when connecting via Modbus RS485. You can

switch to ASCII on the device.

‣

Connect the Modbus data cable to the terminals of the fieldbus module (RS 485) or to

the RJ45 socket of the BASE2 module as described.

For detailed information on "Modbus communication", see the product pages on the

Internet (→ SD01189C).

7.3.4  

Ethernet/IP

With the BASE2 module and the appropriate device version, you can communicate via

Ethernet/IP.

‣

Connect the Ethernet/IP data cable to the RJ45 socket of the BASE2 module.

For detailed information on "Ethernet/IP communication", see the product pages on

the Internet (→ SD01293C).

7.3.5  

PROFINET

With the BASE2 module and the appropriate device version, you can communicate via

PROFINET.

‣

Connect the PROFINET data cable to the RJ45 socket of the BASE2 module.

For detailed information on "PROFINET communication", see the product pages on the

internet (→ SD02490C).

Summary of Contents for Liquistation CSF39





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands