Endress+Hauser Liquistation CSF39 Operating Instructions Manual Download

Page: 70 / 188

Operation

Liquistation CSF39

Hauser

3. Select the desired update and select yes when asked the following:

The current firmware will be overwritten.

After this the device will reboot.

Do you want to proceed?
 The firmware is loaded and the device is then started with the new firmware.

Saving the setup

Saving a setup offers the following advantages, among others :

• Copying settings for other devices

• Quick and easy switching between various setups, e. g. for different user groups or for

recurring sensor type changes

• Restoring a tried-and-tested setup, e. g. if you have changed a lot of settings and no

longer know what the original settings were

1. Insert the SD card into the controller card reader.
2. Go to

Setup

General settings

Extended setup

Data management

Save

setup

Name

: Assign a file name.

4. Then select

Save

 If you have already assigned the file name, you will be asked whether you want to

overwrite the existing setup.

5. Use

to confirm or cancel and assign a new file name.

 Your setup is stored on the SD card and you can upload it quickly to the device at

a later date.

Loading the setup

When you load a setup, the current configuration is overwritten.

1. Insert the SD card into the controller card reader. A setup must have been saved to

the SD card.

2. Go to

Setup

General settings

Extended setup

Data management

Load

setup

 A list of all the setups on the SD card is displayed.

An error message is displayed if there is no valid setup on the card.

3. Select the desired setup.

 A warning is displayed:

The current parameters will be overwritten and the device will reboot.

Warning: Please note that cleaning and controller programs can be active.

Do you want to proceed?

4. Use

to confirm or cancel.

 If you select

to confirm, the device restarts with the desired setup.

Exporting the setup

Exporting a setup offers the following advantages, among others:

• Export in XML format with a stylesheet for formatted display in an XML-compatible

application, such as . Microsoft Internet Explorer

• Importing the data (drag and drop the XML file into a browser window)

1. Insert the SD card into the controller card reader.
2. Go to

Setup

General settings

Extended setup

Data management

Export

setup

Name

: Assign a file name.

Summary of Contents for Liquistation CSF39





























































































































































































Search results

Summary of Contents for Liquistation CSF39

Reviews:

Related manuals for Liquistation CSF39

Brands by name

Popular brands

Endress+Hauser Liquistation CSF39, Operating Instructions Manual

Search results

Summary of Contents for Liquistation CSF39

Reviews:

Related manuals for Liquistation CSF39

Brands by name

Popular brands