Endress+Hauser Liquiline To Go CYM290, Operating Instructions Manual

Page: 36 / 64

Increasing the Battery Life
To increase the battery life for logger operation, the time for the display lighting
selected in the configuration should be as short as possible.
Note: When the selected time has expired, display and backlighting switch off
automatically. They can be switched on again by pressing any key.
Data logger
Configuring the Data Logger
Prerequisite: Data logger is stopped.
The “Data logger” menu shows the number of occupied entries as well as the
number of free entries. Configuration can also be done in the “Configuration” menu
under “Data logger”.
1) Press Menu softkey.
2) Select “Data logger” and confirm by pressing E.
3) Select “Configure data logger” and confirm by pressing E.
4) Configure data logger as required (see table).
5) When you have completed the configuration, you can start the data logger!
36
pH Oxy Cond