Liquiline System CA80TN
Technical data
Hauser
147
15
Technical data
15.1 Input
Measured variables
Total nitrogen [mg/l, ppm]
Measuring range
CA80TN-**S5:
0 to 10 mg/l total-N
CA80TN-**S6:
0 to 50 mg/l total-N
CA80TN-**S7:
0 to 200 mg/l total-N
Types of input
• 1 to 4 digital sensor inputs for sensors with Memosens protocol (optional)
• Analog current inputs (optional)
• Binary inputs (optional)
Input signal
Depending on version
2 x 0/4 to 20 mA (optional), passive, potentially isolated
Current input, passive
Span
> 0 to 20 mA
Signal characteristic
Linear
Internal resistance
Non-linear
Test voltage
500 V
Cable specification
(for optional sensors with
Memosens technology)
Cable type
Memosens data cable CYK10 or sensor fixed cable, each with cable end sleeves or M12
round-pin connector (optional)
Cable length
Max. 100 m (330 ft)
15.2 Output
Output signal
Depending on version:
• 2 x 0/4 to 20 mA, active, potentially isolated (standard version)
• 4 x 0/4 to 20 mA, active, potentially isolated (version with 2 additional analog outputs)
• 6 x 0/4 to 20 mA, active, potentially isolated (version with 4 additional analog outputs)
• Binary outputs
Summary of Contents for Liquiline System CA80TN
Page 2: ......
Page 162: ...www addresses endress com 71593684 71593684 ...
