Liquiline Mobile CML18
Electrical connection
Hauser
13
5.1.3
Connecting the sensor via the Memosens M12 cable
The M12 cable has two different connectors:
• M12 connector for connecting to the device
• Memosens connection for connecting a Memosens sensor
1.
A0040974
3
Cable connection
2.
3.
A0040972
4.
5.
A0041005
1. Remove the protection cap.
2. Insert the M12 connector.
3. Screw on the M12 connector.
4. Insert the sensor into the Memosens connection.
5. Click the Memosens connection into place.
5.2
Charging the device
Charge the device fully before initial commissioning.
There are two possible ways to load the device:
• wirelessly via Qi-certified charger
• via cable with M12 USB data + charging cable
Summary of Contents for Liquiline Mobile CML18
Page 2: ......
