Endress+Hauser iTEMP TMT85, Operating Instructions Manual

Page: 61 / 100

iTEMP TMT85 Technical data
Hauser 61
Electromagnetic compatibility in accordance with all the relevant requirements of the
IEC/EN 61326 series and NAMUR Recommendation EMC (NE21). For details, refer to the
Declaration of Conformity.
Maximum measured error <1% of measuring range.
Interference immunity as per IEC/EN 61326 series, industrial requirements
Interference emission as per IEC/EN 61326 series, Class B equipment
Overvoltage category Measurement category II
Pollution level Pollution level 2
13.6 Mechanical construction
Design, dimensions Dimensions in mm (in)
Head transmitter
24.1 (0.95)
33 (1.3)
!
44 (1.73)
!
7 (0.28)
! 5 (0.2)
B
C
A
A0007301
 17 Version with screw terminals
A Spring travel L ≥ 5 mm (not for US - M4 securing screws)
B Mounting elements for attachable measured value display TID10
C Service interface for connecting measured value display or configuration tool
30 (1.18)
7
A0007672
 18 Version with spring terminals. Dimensions are identical to the version with screw terminals, apart from
housing height.