iTEMP TMT71
Accessories
Hauser
45
DeviceCare SFE100
Configuration tool for devices via fieldbus protocols and Hauser service
protocols.
DeviceCare is the tool developed by Hauser for the configuration of
Hauser devices. All smart devices in a plant can be configured via a point-
to-point or point-to-bus connection. The user-friendly menus enable transparent
and intuitive access to the field devices.
For details, see Operating Instructions BA00027S
FieldCare SFE500
FDT-based plant asset management tool from Hauser.
It can configure all smart field units in your system and helps you manage them. By
using the status information, it is also a simple but effective way of checking their
status and condition.
For details, see Operating Instructions BA00027S and BA00065S
Accessories
Description
W@M
Life cycle management for your plant
W@M offers assistance with a wide range of software applications over the entire
process: from planning and procurement to the installation, commissioning and
operation of the measuring devices. All the relevant information is available for
every measuring device over the entire life cycle, such as the device status, device-
specific documentation, spare parts etc.
The application already contains the data of your Hauser device.
Hauser also takes care of maintaining and updating the data records.
W@M is available:
Via the Internet:
www.endress.com/lifecyclemanagement
12.4 System components
Accessories
Description
RN22
Single- or two-channel active barrier for safe separation of 0/4 to 20 mA standard
signal circuits with bidirectional HART
®
transmission. In the signal duplicator
option, the input signal is transmitted to two galvanically isolated outputs. The
device has one active and one passive current input; the outputs can be operated
actively or passively. The RN22 requires a supply voltage of 24 V
DC
.
For details, see Technical Information TI01515K
RN42
Single-channel active barrier for safe separation of 0/4 to 20 mA standard signal
circuits with bidirectional HART
®
transmission. The device has one active and one
passive current input; the outputs can be operated actively or passively. The RN42
can be powered with a wide range voltage of 24 to 230 V
AC/DC
.
For details, see Technical Information TI01584K
RIA15
Process display, digital, loop-powered display unit for 4 to 20 mA circuits, panel
mounting, with optional HART
®
communication. Displays 4 to 20 mA or up to 4
HART
®
process variables
For details, see Technical Information TI01043K
Graphic Data Manager
Memograph M
The Advanced Data Manager Memograph M is a flexible and powerful system for
organizing process values. Optional HART® input cards are available, each
providing four inputs (4/8/12/16/20). They transmit highly accurate process
values from the directly connected HART® devices, so that they are available for
calculation and data logging. The measured process values are clearly presented on
the display and logged safely, monitored for limit values and analyzed. Via
common communication protocols, the measured and calculated values can be very
easily communicated to higher-level systems or individual plant modules can be
interconnected.
For details, see Technical Information TI01180R
