manualshive.com logo in svg

Endress+Hauser FieldPort SWA50, Operating Instructions Manual, Page: 69 / 76

Share
Download
Endress+Hauser FieldPort SWA50 Operating Instructions Manual Download Page 69

FieldPort SWA50

Maintenance

Hauser

69

14  

Maintenance

14.1   General maintenance

We recommend periodic visual inspections of the device.

14.2   Updating the firmware

You can carry out firmware updates for the FieldPort SWA50 via the SmartBlue app.

Requirements

• The smartphone battery is charged or the smartphone is connected to a power supply.

• The bluetooth signal quality of the smartphone is sufficient.

• In the case of the FieldPort SWA50, DIP switch 2 must be set to ON.

• Do not interrupt the supply voltage while carrying out a firmware update for the

FieldPort SWA50 and the HART field device.

• During the firmware update, at least 10 mA must be transmitted from the connected

HART field device. This can be achieved by simulating the current output at the HART

field device, for example. You can check the current value on the " Device information"

page in the SmartBlue app. →   44

If there is no HART field device connected to the FieldPort SWA50, or if the HART field

device cannot be reached, it is assumed that the loop current is sufficiently high.

→   32

1. Copy update packages to the SmartBlue app.
2. Open the 

Firmware update

 page. Navigation: Root menu > System > FieldPort

SWA50 > Connectivity > Bluetooth configuration

3. Select update package from the list of available packages.

 25

"Firmware update" page

1

Example of a package

4. Tap the 

Start update

 button to download the firmware update to the FieldPort

SWA50. If the update cannot be downloaded, the error message "Internal firmware

update error" is displayed.

Summary of Contents for FieldPort SWA50













































































Reviews:

No comments