Endress+Hauser Fieldgate FXA520 Operating Instructions Manual Download Page 86

Page: 86 / 108

7 Viewing Information (User Mode)

Fieldgate FXA520

Hauser

7.4

Miscellaneous Functions

7.4.1 Autorefresh

Autorefresh

causes the page display to be updated every 120 seconds, see Chapter 6.2.2.

1 Click on

AutoRefresh

to activate updating.

2 Click on

AutoRefresh OFF

to deactivate updating.

7.4.2 Refresh

Pressing

Refresh

causes the page display to be updated and has the same function as the Refresh

button in your Internet browser.
1 Click on "Refresh" to activate updating.

The Refresh function can also be used to automatically update the page display at set time intervals.

For example, to refresh the page every 5 minutes (= 300 s) enter the following in your browser:

http://192.168.252.1/?refresh=300

7.4.3 Hauser

Press the

Hauser

to open the Hauser homepage.

Summary of Contents for Fieldgate FXA520













































































































Search results

Summary of Contents for Fieldgate FXA520

Reviews:

Brands by name

Popular brands

Endress+Hauser Fieldgate FXA520, Operating Instructions Manual

Search results

Summary of Contents for Fieldgate FXA520

Reviews:

Brands by name

Popular brands