Endress+Hauser Fieldgate FXA520, Operating Instructions Manual

Page: 58 / 108

6 Configuring the Fieldgate Fieldgate FXA520
56 Hauser
6.2.2 Navigation bar
The navigation bar offers the following functions in
User
or
Administration
mode.
In User Mode:
Table 6-2: Functions available in User mode
In Administration Mode:
Table 6-3: Functions available in Administration Mode
Function Description
AutoRefresh Automatically updates the display every 120 sec by default
• Click on AutoRefresh to activate function
– The default value can be changed in the Address line of the Internet
explorer: scan&refresh = xxx (s)
• Click on AutoRefresh OFF to deactivate function
Refresh Click to manually update the current display
Hauser Click to open the Hauser website
Overview Displays the values you have selected for monitoring and visualisation
Switch to Administrator Mode Switches the navigation to Administrator Mode
• You must enter user name and password if did not log on with administrator
rights
Settings Displays information on Fieldbus location and hardware
• Location: shows Fieldbus location information
• User: allows you to change your password
• Input: allows the device web settings to be viewed
• Info: displays various Fieldgate logs
Function Description
AutoRefresh No function in Administrative Mode
Refresh Click to manually update the current display
Hauser Click to open the Hauser website
Overview Displays the values you have selected for monitoring and visualisation
Switch to User Mode Switches the navigation to User Mode:
Settings Displays information on Fieldgate location and hardware
• Location: shows Fieldgate location information
• User: allows user access rights to be configured
• Network: allows network access to be configured
• Mail: allows e-mails to be configured
• Scan: allows scanning of devices to be configured
• Input: allows the device web settings to be configured
• Info: displays various Fieldgate logs