Endress+Hauser Fieldgate FXA520, Operating Instructions Manual

Page: 23 / 108

Fieldgate FXA520 4 Hardware Installation
Hauser 21
4.1.3 Accessing the DAT module/SIM card/service interface
The DAT module, SIM card receptacle for GSM devices and service interface are located behind the
front panel. You require a screwdriver with a normal blade.
Caution!
• Switch off the Fieldgate before inserting or removing the DAT module
•
Do not insert the SIM card
until the Fieldgate GSM settings have been made, see Chapter 5.3.
1 Insert the screwdriver blade in the slot provided for it and gently prise the front panel forwards
until it is detached from its fastening.
2 Pull the panel downwards to access the connections.
3 Close the panel after use.
Fig. 4-3: Opening the front panel
4.1.4 Dismounting a Fieldgate
Dismounting
1 Switch off the power to the Fieldgate.
2 Insert a screwdriver blade between the terminal block and the housing and prise the block
from its socket.
– Repeat for all terminal blocks.
3 Insert the screwdriver blade in snap fastener and prise downwards until the fastener releases
itself from the rail, then pull the Fieldgate free.
Fig. 4-4: Dismounting Fieldgate
L D
FXA520 Ethernet
Service interface
DAT
Component diagram
Device lock/reset
Prise open
Pull down
SIM card (GSM version)
2
b
b
a
a
3
OFF
1