Endress+Hauser Fieldgate FXA320, Operating Instructions Manual

Page: 66 / 106

Fieldgate FXA320 6 Configuring the Fieldgate
Hauser 64
6.4 Overview
The Overview page is displayed after the user has logged into the Fieldgate or can be called by
clicking on
Overview in the navigation bar. It contains information on the devices connected to
the Fieldgate and can be configured according to user specifications in Administrator mode. The
configuration is made in various setup dialogs which are described in this chapter as follows:
• Chapter 6.4.1: Opening the setup dialogues
• Chapter 6.4.2: Analog input
• Chapter 6.4.3: Binary input
• Chapter 6.4.4: Description/Range/Limit/Alarm
• Chapter 6.4.5; Sensor error
NOTE!
• You cannot change device parameters with the Fieldgate Web Server.
• Tags can be set for the digital and analog inputs in the appropriate setup and for Fieldgate
"board temperature" and "5V supply" in a separate Tag Setup dialog.
6.4.1 Opening the setup dialogs
The setup dialogue can be opened by clicking on the device tag in the Overview page when in
Administrator mode or through the
Settings menu as follows:
Procedure 1 If not already selected, press "Switch to Administrator Mode" and log in as administrator.
2 Press Settings, then Input : the FXA Inputs and Internal Sensors dialog appears:
– Analog In 1 and Analog In 2 concern the 4...20 mA channels
– Digital In 1 to Digital In 4 concern the binary input channels
– Board Temperature and 5V supply concern Fieldgate internal sensors
3 Now click on the device tag you wish to configure, the Device Setup dialogue appears:
4 Now configure the devices as described in chap. 6.4.2 to chap. 6.4.5
– Depending upon device type several setup dialogs as well as other information dialogs
may appear