Endress+Hauser FieldEdge SGC500, Operating Instructions Manual, Page: 23 / 28

FieldEdge SGC500 FieldEdge SGC500 and Netilion
Hauser 23
9.6 Connecting to the EtherNet/IP
This section is not applicable to fieldbuses that are connected to the SGC500 via a field
gateway.
Requirements
• Access to Hauser Netilion is established.
• The SGC500 is connected to the Netilion Cloud.
1. Log in to Hauser Netilion https://netilion.endress.com/app/id/ .
2. In Netilion, use the Navigation function to open the Edge Devices page.
3. On the Edge Devices page, click the relevant SGC500 .
 The "Edge Device Details" page is displayed.
4. Click Edit .
 The "Edge Device Details" page is displayed.
5. In the "EtherNet/IP Activation Status" section, change the status to Activate .
6. Save the settings by clicking Save .
7. Wait for the settings to update.
8. Use
F5 to refresh the list of edge devices.
 The SGC500 is displayed with a green dot.
The Ethernet field network is connected to the SGC500. The SGC500 is now ready
for use with Netilion Services.
10 FieldEdge SGC500 and Netilion
10.1 Using the FieldEdge SGC500 in Netilion
The following connections are possible:
• Netilion Services or
• Netilion Connect
Netilion Services
For detailed information on Netilion Services, see
https://netilion.endress.com
Netilion Connect
For detailed information on Netilion Connect, see
• For documentation for accessing field device data via API, see
https://developer.netilion.endress.com/discover
• For documentation for accessing field device data via API, see
https://api.netilion.endress.com/doc/v1/ or QR code.