Endress+Hauser Ecograph RSG35 Operating Instructions Manual Download

Page: 77 / 174

Ecograph T, RSG35

Technical data

Hauser

Modbus RTU/TCP slave

The device can be connected to a Modbus system via RS485 or Ethernet interface. Up to 12

analog inputs and 6 digital inputs can be transmitted via Modbus and stored in the device.

15.10 Certificates and approvals

CE mark

The measuring system meets the legal requirements of the applicable EC guidelines. These

are listed in the corresponding EC Declaration of Conformity together with the standards

applied. Hauser confirms successful testing of the device by affixing to it the CE

mark.

UL approval

UL recognized component (see

www.ul.com/database

, search for Keyword "E225237")

CSA

The product meets the requirements as per "CLASS 2252 05 - Process Control Equipment"

Other standards and

guidelines

• IEC 60529:

Degree of protection provided by housing (IP code)

• IEC/EN 61010-1:

Safety requirements for electrical equipment for measurement, control and laboratory

use

• IEC/EN 61326 Series:

Electromagnetic compatibility (EMC requirements)

15.11 Ordering information

Ordering information

Detailed ordering information is available from the following sources:

• In the Product Configurator on the Hauser website:

www.endress.com

-> Click

"Corporate" -> Select your country -> Click "Products" -> Select the product using the

filters and search field -> Open product page -> The "Configure" button to the right of the

product image opens the Product Configurator.

• From your Hauser Sales Center:

www.addresses.endress.com

Product Configurator - the tool for individual product configuration

• Up-to-the-minute configuration data

• Depending on the device: Direct input of measuring point-specific information such

as measuring range or operating language

• Automatic verification of exclusion criteria

• Automatic creation of the order code and its breakdown in PDF or Excel output

format

• Ability to order directly in the Hauser Online Shop

Scope of delivery

The scope of delivery of the device comprises:

• Device (with terminals, as per order)

• 2 fastening clips

• USB cable

• Optional: Industrial grade SD card (card is located in the SD slot behind the flap on the

front of the housing)

• "Field Data Manager (FDM)" analysis software on DVD (Essential, Demo or Professional

version, depending on order)

• "FieldCare Device Setup / DeviceCare" configuration software on DVD

• Delivery note

• Multilanguage Brief Operating Instructions, hard copy

Summary of Contents for Ecograph RSG35















































































































































































Search results

Summary of Contents for Ecograph RSG35

Reviews:

Related manuals for Ecograph RSG35

Brands by name

Popular brands

Endress+Hauser Ecograph RSG35, Operating Instructions Manual

Search results

Summary of Contents for Ecograph RSG35

Reviews:

Related manuals for Ecograph RSG35

Brands by name

Popular brands