Operation
Ecograph T, RSG35
48
Hauser
The following display modes are possible: Curve, Curve in ranges, Waterfall, Waterfall in
ranges.
The various display modes have no influence on the signal recording.
10.11 Signal analysis
The analyses saved in the device are displayed in the main menu under
"Operation ->
Signal analysis"
.
•
Actual intermediate analysis:
Here, you can have the current (i.e. not yet completed) intermediate analysis displayed.
•
Actual day:
Here, you can have the current (i.e. not yet completed) daily analysis displayed.
•
Actual month:
Here, you can have the current (i.e. not yet completed) monthly analysis displayed.
•
Actual year:
Here, you can have the current (i.e. not yet completed) annual analysis displayed.
•
Search:
Search and display of analyses. Select which analyses should be searched for/displayed:
Intermediate analysis, Daily analysis, Monthly analysis, Annual analysis.
10.12 Search in trace
In the main menu, the internal memory can be searched for events or times under
"Operation -> Search in trace"
.
Search for events:
The event logbook forms the basis for searches for events. To search
more easily for certain events (e.g. setup changes), the search filter can be used to select
and search for the desired events. In the standard all events are shown. In the event list
displayed, it is possible to select an event and go directly to this point in the history (if still
in the memory).
Search for time:
When searching for a time in the past, the user can enter a date and a
time to specify when the system should start displaying historical data. Once the date/time
have been entered and confirmed, the display goes to the selected time in the active group.
10.13 Changing the display mode
The display mode of the active group can be changed in the main menu under
"Operation
-> Change display mode"
.
The following display modes are possible: Curve, Curve in ranges, Waterfall, Waterfall in
ranges, Bargraph and Digital display.
The various display modes have no influence on the signal recording.
10.14 Adjusting the brightness of the display
You can adjust the brightness of the display in the main menu under
"Operation -> Adjust
brightness"
:
Parameters
Possible settings
Description
Adjust brightness
0-100
Default:
80
Sets the brightness of the display
