Endress+Hauser easytemp TSM 470 F, Operating Instructions Manual, Page: 6 / 28

Identification Compact RTD transmitter
6 Hauser
2 Identification
2.1 Unit identification
2.1.1 Legend plate
Compare the legend plates on the compact RTD transmitter with the following figures:
Fig. 1: Example: Compact RTD transmitter legend plate with order code - K = Standard model, North
America region
Fig. 2: Legend plate with technical data and configuration (example)
CE Mark, declaration of conformity
4 4 4 4
The devices are designed to meet state-of-the-art safety requirements, have been
tested, and left the factory in a condition in which they are safe to operate. The devices
comply with the applicable standards and regulations in accordance with IEC61010
"Protection Measures for Electrical Equipment for Measurement, Control, Regulation
and Laboratory Procedures" and with the EMC requirements of IEC61326.The
measuring system described in these Operating Instructions thus complies with the
statutory requirements of the EC Directives. The manufacturer confirms successful
testing of the device by affixing to it the CE mark.
UL recognized component to UL 3111-1
3-A Sanitary Standard
5 5 5 5
Authorization to continue to apply the 3-A Symbol to the models of equipment,
conforming to 3-A Sanitary Standards for Sensors and Sensor Fittings and Connections
Used on Fluid Milk and Milk Products, Number: 74-02 for TSM470P and TSM470F.
American Bureau of Shipping (ABS)
Ship Building Type Approval (TSM470G).