Endress+Hauser Deltabar FMD72, Operating Instructions Manual

Page: 30 / 108

Operation with an operating menu Deltabar FMD72
30
E HAUSER
RMA 422
1
7
8
2
6 5
3
4
A0017651
1 PLC (programmable logic control)
2 Commubox FXA195 (USB)
3 Computer with operating tool (e.g. FieldCare, AMS, SIMATIC PDM)
4 Field Communicator 375, 475
5 Field Xpert SFX100
6 VIATOR Bluetooth modem with connecting cable
7 Transmitter power supply unit RMA422 or RN221N (with communication resistor)
8 Connection for Commubox FXA195
Only use certified operating devices in hazardous area!
9.4 Operating the device using onsite display (optional)
A 4-line liquid crystal display (LCD) is used for display and operation. The onsite display shows
measured values, dialog text as well as fault and notice messages in plain text, thereby supporting
the user in every stage of operation. The device display can be turned in 90° steps. Depending on
the installation position of the device, this makes it easy to operate the device and read the measured
value.
Functions:
• 8-digit measured value display incl. sign and decimal point, bargraph for 4 to 20 mA HART as
current display.
• Simple and complete menu guidance thanks to separation of the parameters into several levels.
• Each parameter is given a 3-digit ID number for easy navigation.
• Option for configuring the display according to individual requirements and preferences, such as
language, alternating display, display of other measured values such as sensor temperature,
contrast setting.
• Comprehensive diagnostic functions (fault and warning message, peak-hold indicators, etc.).
• Quick and safe commissioning
9.4.1 Setting the contrast on the display module
•
O
and
F
(press simultaneously): increases the contrast.
•
S
and
F
(press simultaneously): decreases the contrast.