Endress+Hauser Deltabar FMD72, Operating Instructions Manual

Page: 29 / 108

Deltabar FMD72 Operation with an operating menu
29
User role Submenu Meaning/use
Diagnostics Contains all the parameters that are needed to detect and analyze operating errors.
This submenu has the following structure:
•
Diagnostics list
Contains up to 10 currently pending error messages.
• Event logbook
Contains the last 10 error messages (no longer pending).
• Device info
Contains information for identifying the device.
• Measured values
Contains all current measured values.
• Simulation
Is used to simulate pressure, level, flow, current and alarm/warning.
• Reset
• Sensor LP
• Sensor HP
Expert Expert Contains all the parameters of the device (including those already in one of the
submenus). The "Expert" submenu is structured by the function blocks of the device.
It thus contains the following submenus:
•
System
Contains all device parameters that neither affect measurement nor integration into
a distributed control system.
•
Measurement
Contains all parameters for configuring the measurement.
•
Output
Contains all parameters for configuring the current output.
•
Communication
Contains all parameters for configuring the HART interface.
•
Diagnostics
Contains all the parameters that are needed to detect and analyze operating errors.
9.3 Operating options
9.3.1 Local operation
1
A0017650
1 Display and operating module with push buttons. Cover must be opened for operation.
9.3.2 Remote operation via HART
Options for remote operation via HART: