Installation
Cleanfit CPA875
20
Hauser
a0023305
Fig. 18:
Sensor installation, Part 2
1
Open-ended wrench
2
Protective cap
4
360 mm gel or KCl sensor
Always install the protective cap before moving the assembly to the measuring position.
The protective cap cannot be removed in the measuring position. This prevents the
sensor from being removed.
3.4
Post-installation check
• Following installation, check all the connections to ensure that they are properly secured
and sealed.
• Ensure that the hoses for the rinse water connections cannot be removed without effort.
These pipes are in open contact with the medium and must be secured accordingly.
• Check the hoses for damage.