multi EA 5100
Sulfur analysis with the S module 5100 coulometric
77
10.1.3 Connection
The electrical connection and the interface to the basic module can be found on the rear
of the detection module.
The device switch for switching the detection module on and off is located on the top
right of the rear of the device (when viewed from the front). The device fuse and power
connection are located beneath it.
Communication with the basic module is performed via a 9 pin interface cable. The in-
terface on the rear of the device is labeled "S-Coul".
1
2
Figure 52Rear of the coulometric sulfur detector
1 Power connection, fuse holder, de-
vice switch
2 Interface to the basic module
10.2 Installation
CAUTION
Risk of injury
A risk of injury due to broken glass is present when handling glass parts.
¡
Handle glass parts with extreme caution.
