Function and setup
multi EA 4000
20
Figure 3 Dust trap at the combustion furnace
The dust trap is arranged easily accessible on the left side of the device behind the
contact guard.
Directly after the dust trap a dust filter has been installed in the gas path. It holds back
particles which the dust trap could not manage to remove from the measuring gas.
Figure 4 Dust filter
The drying tube, filled with magnesium perchlorate as a desiccant, has been installed
in the gas path for drying the measuring gas during C/S determination.
A halide trap (U tube) is has been installed in the basic device to remove interfering
substances from the measuring gas and to protect the detectors and the flow regula-
tor. The U tube is filled with special copper wool and brass wool. The filling of the hal-
ide trap has to be renewed at the latest once half of the copper wool or the brass wool
is discolored.
Dust filter
Drying tube and
halide trap for
C/S determination
Summary of Contents for Analytik Jena multi EA 4000
