Basic information
InnuPure C16
touch
6
1.2
Intended use
The InnuPure C16
touch
is a flexible and efficient extraction system for the fully auto-
mated isolation and purification of nucleic acid in chemical and biological laboratories.
The device is intended for general laboratory use.
The InnuPure C16
touch
including its original accessories must only be used for the ap-
plications described in this instruction manual. The manufacturer does not accept lia-
bility for any other use, including that of any individual modules or components.
1.3
Warranty and liability
The warranty duration and liability comply with the legal requirements and the provi-
sions in the general terms and conditions of Analytik Jena.
Deviations from the intended use described in this user manual result in limitations of
warranty and liability in the event of a damage. Damage to wearing parts is not in-
cluded in the warranty.
Warranty and liability claims are excluded for personal injury and property damage
due to one or several of the following causes:
use of the InnuPure C16
touch
other than intended
improper commissioning, operation and service of the InnuPure C16
touch
modifications of the equipment without prior consultation with Analytik Jena
operation of the device with faulty safety equipment or improperly fitted safety and
protection equipment
inadequate monitoring of the equipment components subject to wear
use of other than original spare parts, wearing parts or consumables
improper repairs
faults due to the non-observance of this user manual