InnuPure C16
touch
Operation with IPextract
39
6.3.3
The Extraction page – selecting the extraction protocol
The extraction page serves to select the lysis type and the extraction protocol used.
Please refer to the kit manual for information on the suitable protocol and the lysis.
Fig. 14
E
XTRACTION
page for SmartExtraction kits
Fig. 15
E
XTRACTION
page for kits with magnetic beads
Enter the following data:
Element
Description
K
IT
N
AME
Name of the kit, adopted from the K
IT
I
NFORMATION
page
L
YSIS
T
YPE
Select lysis type depending on the source material:
I
NTERNAL
L
YSIS
Lysis is processed inside the device
E
XTERNAL
L
YSIS
Lysis is performed manually outside the device
E
THANOL
REMOVAL
For SmartExtraction only
Select the procedure of ethanol removal
D
RYING
Evaporate ethanol by heating the bottom of the
cavity
R
INSING
Dissolve ethanol in the rinse solution during a mix-
ing step
P
ROTOCOL
Select the extraction protocol (
→
“Creating and loading templates” p. 35).
E
LUATE
V
OLUME
Enter the eluate volume or setting it via the slider.