Endress+Hauser Analytik Jena CyBio Well vario, User Manual

Page: 120 / 150

104 Rev B 2022/03
Maintenance & Care CyBio Well vario
9.2 Maintenance Work
9.2.1 Overview
The following table lists required maintenance and care work items with related periodici-
ties.
Table 15: Maintenance intervals
Maintenance Action Maintenance interval
Weekly
Monthly Every six
months
Clean transport rails with carriage or rotary
stage
x
Use mild cleaning agent or disinfectant to clean
the tip wash trough
x
Wash tubing
x
Replace used tips
x
Clean tip magazine, autoclave magazine if nec-
essary (pipetting head)
x
Check filter of compressed air control unit for
condensate level and drain if necessary (only for
systems with capillary head)
→ refer to section 19.2.9
x
Clean all liquid-holding vessels and the outside
of tubes with disinfectant
x
Clean tubes with disinfectant or autoclave tubes
x
Inspect sealing plate (pipetting head) for clean
condition
x
Inspect carriage or rotary stage for visible dam-
age and clean as necessary
• Remove tip magazine
• Switch power off
• Remove microplates or reservoirs
x
Only linear transporting unit
• Take carriage off and clean with mild clean-
ing agent or disinfectant
• Mount carriage again
Inspect lifter for damage and clean if necessary
x
Perform a precision test
( → refer to page 51 )
x
Perform a leak test
(
→
refer to page 55 )
x
Check electrical components and cabling, test
grounding (PE) conductor (only qualified electri-
cian!)
x
Check and clean compressed air control unit
(customer service personnel only)
x
Dabbing station → page 43
x