23
3.
HANDLE THE METER GENTLY AND CAREFULLY.
Dropping it
can damage the electronic parts or the case.
4.
KEEP THE METER CLEAN.
Wipe the case occasionally with a
damp cloth. DO NOT use chemicals, cleaning solvents, or
detergents.
5.
USE ONLY FRESH BATTERIES OF THE RECOMMENDED
SIZE AND TYPE.
Remove old or weak batteries so they do not
leak and damage the unit.
6.
IF THE METER IS TO BE STORED FOR A LONG PERIOD OF
TIME
, the batteries should be removed to prevent damage to the
unit.
BATTERY INSTALLATION
WARNING
: To avoid electric shock, disconnect the test leads from
any source of voltage before removing the battery cover.
1. Turn power off and disconnect the test leads from the meter.
2. Open the rear battery cover by removing two screws (B) using a
Phillips head screwdriver.
3. Insert the battery into battery holder, observing the correct polarity.
4. Put the battery cover back in place. Secure with the screws.
WARNING:
To avoid electric shock, do not operate the meter until
the battery cover is in place and fastened securely.
NOTE:
If your meter does not work properly, check the fuses and
batteries to make sure that they are still good and that they are
properly inserted.
