User Manual
Slam Stick User Manual
Version No. 2.0
21
Slam Stick Lab: Configuration
The Slam Stick products are capable of being configured to specific measurement settings based
on user application or preference. As such, there are a large of number of different configuration
options available to the user. This manual as well as Video 1 of Midé’s
go into detail on how to use Midé’s free Slam Stick Lab software to change the configuration
settings on a Slam Stick to best meet your testing needs.
goes through an example configuration. The video is available on
To open up the configuration settings window in the Slam Stick Lab, a user will do the following
with the Slam Stick Lab open on a computer and the Slam Stick plugged-in to the same computer:
1.
Select “Device” in Slam Stick Lab (located at the top of the viewing window)
2.
Select “Configure Device” (appears when “Device” is selected)
3.
Select the Slam Stick that is to be configured in the Select Recorder window (window
appears when “Configure Device” is selected and the device information will highlight
blue when it is selected)
