EDM01-33v1 DAG_7.5G4_Card_User_Guide
©2008 Endace Technology Ltd. Confidential - Version 1 - November 2008
3
Card Description
The DAG 7.5G4 card provides four optical or copper Gigabit Ethernet interfaces. It is capable
of full line rate (1,000Mbps) capture and transmission of Ethernet traffic. Full packet capture
at line rate allows recording of all header information and/or payload with a high precision
timestamp.
The key features of the card are:
•
Four SFP ports for 1000Base-SX or 1000Base-LX optical Ethernet or 10/100/1000Base-
T copper Ethernet,
•
Header only or variable length capture,
•
Full line rate transmit,
•
100% capture into host memory at full line rate for IP packets from 48 to 9600 bytes
•
Conditioned clock with PPS input and local synchronization capability.
•
PCIe x4 Gen 1.0a, 8 Gigabits per second (Raw). Actual performance of PCIe will
depend on the motherboard and other factors in the system architecture.
•
Bit level masks applied to the first 64 bytes of each packet can be used to classify
packets and make drop/capture decisions.
Battery removal – don’t do it!
Removing the battery from a DAG card voids your warranty.
Removing the battery from a DAG card will cause the loss of encryption key used to decode
the DAG card's firmware. Once the encryption key is lost the DAG card must be returned to
Endace for reprogramming.
The battery in this product is expected to last a minimum of 10 years.
Caution
Risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries carefully.
Summary of Contents for DAG 5.2X
