Endace Measurement Systems.
http://www.endace.com
EDM01.05-10r1 DAG 4.3S Card User Manual
4
Revision 6. 22 September 2005.
1.5 EMI Suppression Ferrite Fitting
Description
In order to ensure compliance to EN55022 and FCC 47 Part 15 Class A
Radiated emission limits, the supplied EMI Suppression Ferrite must be
fitted to any cable connected to the Time Synchronization Connector.
The Ferrite component supplied in the DAG 4.3S product packaging box
must be fitted within 1cm of the plug housing..
Figure
Figure 1-3 shows the DAG 4.3S card Ferrite component.
Figure 1-3. DAG 4.3S Card Ferrite Component.
1.6 DAG 4.3S Card System Requirements
Description
The DAG 4.3S card and associated data capture system minimum
operating requirements are:
•
PC, at least Intel Xeon 1.8GHz or faster
•
Intel E7500, ServerWorks Grand Champion LE/HE or newer chip set
256 MB RAM
•
At least one free PCI-X 1.0 slot supporting 66-133MHz operation
•
Software distribution free space of 30MB
•
Endace Linux Install CD requires 6 GB
PCI buses are not compatible with the DAG 4.3S card. Only PCI-X buses
are supported.
Operating
system
For convenience, a Debian 3.1 [Sarge] Linux system is included on the
Endace Software Install CD. Endace currently supports Windows XP,
Windows Server 2000, Windows Server 2003, FreeBSD, RHEL 3.0, and
Debian Linux operating systems.
Continued on next page
