USER MANUAL
ENCOM PULSE Link
© 2012-2015 Encom Wireless Data Solutions Inc.
For ENCOM PULSE Link Version 2.2.6
Page 21
Connecting to a 5000 Series Radio
To connect to a 5000 series radio in which a 5000 series adapter card has been installed:
1. Run the ENCOM PULSE Link application on your computer.
2. The
at the top right-hand corner of the application's window will prompt you to
connect to a radio.
3. Power the 5000 series radio with the provided wall mount power adapter, and then connect
the radio to your computer using a serial or serial-to-USB adapter cable.
4. Click the
Connect to serial device
button at the left of the status bar.
5. The
Connect to device serial port
form is displayed.
6. Select the serial communications port to which the radio is connected, and then click the
Connect
button.
Summary of Contents for iPULSE R
Page 2: ......
