No changes or modifications to this device are permitted unless expressly approved by engineering. Failure
to do so could void FCC certification.
CONFIDENTIAL UNPUBLISHED WORK
Halo
HACS1
Manual
HACS1
MANUFACTURING, INSTALLATION, OPERATION, AND
LABELING MANUAL
NOTE: No changes or modifications to this device are permitted unless expressly approved by engineering.
Failure to do so could void FCC certification.
FCC ID: 2AHPO-HACS1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
