background image

MPB-06 -Bookshelf Pot

IMPORTANT!

Enclume Design Products is committed to the highest quality in the manufacture of this

RACK IT UP!

pot rack.

The components of each rack are carefully inspected before shipment.

However, in case there is a problem, PLEASE LET US HELP YOU FIRST. Do not return the item to where you
purchased it. First, call us and explain what is missing or wrong. We will do our best to help with any question or
problem you have—and as fast as possible.

Call us TOLL FREE 1 (877) 362-5863 and ask for customer service. Thank you!

TOOLS NEEDED

-

We provide all tools required for assembly: hex wrench, fastener hardware (nuts, bolts).

Note under attaching instructions on page 3 of this booklet, the list of tools you will need to provide.

RACK IT UP!

5-Year Limited Warranty

This product is warranted to be free of material defects for a period of five years from the date of purchase. Your exclusive
remedy is the repair or replacement of the defective product, and shall be subject to the following conditions: (1) You send a
notice of any defect to Enclume within the warranty period, and (2) You return the defective product, to Enclume
Design Products, Inc., 24 Colwell Street, Port Hadlock, WA 98339,

postage prepaid,

within

20

days following receiving a

return authorization number. (A return authorization number may be obtained from Enclume by calling the number at the
bottom of this booklet.) There are no other warranties expressed or implied. There are no warranties of merchantability or
fitness for a particular purpose. Enclume specifically disclaims any and all incidental or consequential damages arising out of
purchase, installation or use of this product.

RACK IT UP!

by Enclume

is a trademark of Enclume Design Products, Inc.

All rights reserved. Made in China. Packed in the U.S.A.

©2008 Enclume Design Products, Inc

.

1

Summary of Contents for RACK IT UP! MPB-06

Page 1: ...ree of material defects for a period of five years from the date of purchase Your exclusive remedy is the repair or replacement of the defective product and shall be subject to the following conditions 1 You send a notice of any defect to Enclume within the warranty period and 2 You return the defective product to Enclume Design Products Inc 24 Colwell Street Port Hadlock WA 98339 postage prepaid ...

Page 2: ...e decorative only and will not be used as anchors How To Assemble Your Pot Rack Item No Assembly Hardware Qty Item No Qty 3A Front side bar 4 though holes 1 28A Barrel Bolt 5 3D Back bar 2 through 2 tap holes 1 28B Barrel Nut 5 7B Grid bracket for bookshelf 3 Installation Hardware 8B Grid Shelf 1 19C Button head bolt 1 4 x 20 x 2 2 9 Bookshelf end piece 2 26A Hex wrench 2 18A 1 4 Button head screw...

Page 3: ...he grid On the wall mark the four points 20 3 4 long by 9 3 4 high where the top of rack arms and back bar will attach Then tap a small nail through each mark to be certain a joist is not in the way NOTE because your pot rack includes toggle anchors you DO NOT need to locate and bolt to studs See more information under STEP 2 below STEP 2 INSTALL DRYWALL ANCHORS RACK IT UP s drywall togglers elimi...

Page 4: ...e straps with other hand Press cap inside the hole so flange is flush with drywall sur face 3 Bend straps at wall by pushing side to side snapping off straps level with flange of cap 4 Repeat for other anchor point at top of rack arm 5 Install the LOWER red sleeve anchors Using an electric drill with 5 16 bit drill a hole at each of the LOWER marks With your ham mer gently tap a red wall screw sle...

Reviews: