GIANT WHISK POT RACK
Model PR41
Enclume racks are the ultimate in
Quality, design, strength and function.
You now own one of the finest cookware racks made.
WARNING: PLEASE READ ALL OF THESE
INSTRUCTIONS BEFORE ASSEMBLING AND
INSTALLING YOUR RACK
Enclosed you will find everything needed for the assembly and use of your storage rack. Two people
make assembly & installation easier. Hardware and rack components included are
:
Rack Components included:
Hardware included:
1– Cluster of 8 Whisk wires
1– Large Allen wrench
1–
Whisk
handle
1–
Open/closed-end
wrench
1– Round nose plate (8 bolts and nuts)
2– 2” S-style chain hooks
1– Nose hanger 2– Lengths of 3/16” chain, one 6” long and other 12”
10– S-style pot hooks
2– Ceiling screw hooks (for wood mounting)
10– Pot hook clamps
1 – Two-point, 3/8” Toggler Set, with two Togglers and two machined ceiling hooks,
(for dry wall mounting)
,
ASSEMBLY INSTRUCTIONS for YOUR PR41 WHISK RACK
1)
Spread out the product box contents on a table and locate the rack components and hardware items listed above. If you are
missing an item please call us at the number below and we will promptly send you what you need.
2)
The small end of the Whisk wire cluster has been inserted into the Whisk handle – so stand the cluster on end with the
handle down. Lightly tighten the cluster inside the handle using the large Allen wrench inserted into the base of the cluster.
3)
Two assemblers help now. Slowly spread the wires out and begin inserting the ends into the nose plate. Follow the order set
out below. As the tops of the wires are set into the nose plate tighten the underside nuts with the open/closed end wrench
Step 3
STEP 1 STEP 2
STEP 3
STEP 4 – DONE!
4)
Make sure all eight Whisk wires are spread evenly around the nose plate, and then tighten all nuts to tightly secure the wires
in the nose plate.
5)
The next step is to tighten firmly the wire cluster in the handle. But before you do, please note the diagram below. The
eyehook already installed in the back of the handle must be lined-up between a pair of wires. This will allow the eyehook to
have the same placement as the nose hanger in front – and the Whisk will then hang straight. We all want this!
Please continue on the other side
