Enclume
Décor Basket Racks
DR17a & b
Enclume Décor racks are the ultimate in
quality, design, strength and function.
C Congratulations for owning one of the finest
storage racks made.
WARNING:
READ ALL OF THE INSTRUCTIONS
BEFORE ASSEMBLING AND USING
YOUR RACK.
Enclosed you will find everything needed for the assembly
of your pot rack. Two people make assembly
and installation easier. The parts and hardware included are:
Components included:
1 - Hammered Steel Rectangle Basket
1 – Top Cross Bar
4 - Curved Brackets
1 - Grid
Hardware included:
2 - Ceiling Screw Hooks (Large)
2 – 6” Chains
2 - 'S' Hooks 2"
12 - Pot Hooks (DRPHS)
6 - Grid Brackets - DRGB
1 – 5/32" Hex Key
2 – 1/4 x 5/8" Button Head Screws
Toggle Kit
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1)
Lay rack body (rectangle) on firm surface. Protect surface with corrugated box if necessary.
2)
The curved brackets are pre-assembled as a set, each set will have one curved bracket with a "tapped" (threaded hole)
and one with a drilled hole (no threads). Remove the ¼” x 5/8" button head from one set. Slipping each curved bracket
(the end with the tight "U" shape bend) onto the rack body one on each side of the rack. Then place the Top Cross Bar
between the two tops of the Curved Brackets; using the ¼” x 5/8” button head screw, attach the two curved brackets and
the cross bar together. (Please use the hole closest to the end of the cross bar as the larger of the two holes must be used to
hang fixture).
3)
Repeat process for other set of curved brackets. Securely tighten all screws at this time.
4)
Make sure that your Curved Brackets are evenly spaced from each end of your rack. The DR17a has hanging centers of
16” and the DR 17b has hanging centers of 14”.
5)
Your Rack may be carefully anchored into solid wood of the ceiling joist or beams, using the ceiling hooks. If you are
mounting in other than solid wood, use the Toggles and follow the instructions in the kit. Carefully measure the area
where the rack is to be hung and install the ceiling screw hooks (14" apart for the DR17b or 16” apart for the DR17a) into
the ceiling joists.
6)
Place four grid brackets over the sides of the rack on the inside of each of the four curved brackets with the straight end of
the brackets facing towards the inside of the rack. Place one grid bracket on each end of the rectangle. Next place the grid
on top of the grid brackets. (See note next page).
7)
Insert the "S" hooks into each of the remaining holes in the cross bar and the other end through one end of the chain.
Carefully lift your rack into place and attach the other end of the chain onto the ceiling screw hooks.
::
potracks
.
com
Call 1-800-667-8721 anywhere in the US and Canada -
www.kitchen
source
.com
::
potracks
.
com
powered by
::
kitchensource
.
com
