www.
en
c
loscreens
.com
5
ASSEMBLY
INSTRUCTIONS
ZP19052
b
1.
Insert (9) Horizontal Pickets
(H)
into the routed
holes in one of the posts.
b
2.
Starting at one end of the opposite post, guide
the pickets into the routed holes in the post.
STEP 2:
ASSEMBLE
FULL PANEL
b
Identify the Front Panel Top Rail
(F)
and the Front Panel Bottom Rail
(D)
as shown below.
Pressure fit (2) loose Rail End Caps
(B)
into the ends of each rail. Set these rails aside for now.
STEP 2.1
STEP 2.2
D
STEP 2.3
H
2¾”
4¾”
Note:
Identify the top
of the screen by finding
the side of the posts
with pre-drilled holes
2¾” from the end of the
posts.
4¾”
2¾”
b
Take (2) Posts
(G)
and position them so the
routed holes face in towards each other as
shown.
G
F
B
1
2
