en
2.3 SAFETY IN SERVICE
•
Do not clean or inspect the equipment in operation.
•
Do not start the engine with the cylinder flooded and after taken out the spark plug in petrol
engines.
•
Do not check if the spark plug gives off sparks if the cylinder is flooded with petrol or there are
petrol fumes.
•
Do not use solvents or fuels to clean the equipment, above all in closed areas.
•
Keep the area close to the silencer free from inflammable materials.
•
Before carrying out servicing operations on equipment with petrol engines, remove the spark
plug to prevent an unwanted start-up of the engine.
2.4 TRANSFERS
L
WA
ENARCO, S.A.
2004
C/ Tomás Edison, 19
50014 ZARAGOZA
(SPAIN)
MOD:
NR:
VIBRATING PLATES
5
PEN10B-PEN13C-PEN16C-PEN16D
