Enapter Electrolyser, Owner'S Manual, Page: 48 / 54

VE RS I ON D O CU MEN T TI TLE RE LEAS E DAT E
03 EL – Owner’s Manual 2022-04-29
EL – Owner’s Manual – Rev.04 – April 2022 42
This is a draft manual, technical specifications are subject to change
7.3 CLEANING
When performing the routine maintenance processes and checks, the device should be inspected and
cleaned. Start by carefully using a vacuum cleaner (not included) to clean out the ventilation
openings/grills. Afterwards, use a damp cloth (no acids, aggressive or abrasive substances) to clean the
outside of the device.
Warning!
Remove the supply of power before cleaning the device. Never handle the electrical
connections with wet hands. Ensure the device is dry before returning the supply of
power to it.
Attention!
The internal components of the device do not need to be cleaned and must not be
accessed by the user for cleaning.
Only trained and authorised personnel is allowed to open and inspect the device for
maintenance reasons.
7.4 DISPOSAL
Enapter is fully committed to recycling the devices and its components.
Please return the device to Enapter at the end of life, where the device will be fully
recycled.
By ensuring this product is correctly recycled, you will help to further reduce your impact
on the environment and aid us in making the world cleaner and greener.
7.5 TRANSPORT
For returns, please contact the Enapter customer support team to receive the Return Material
Authorization form and the packaging instructions.
Before transport, verify the electrolyte tank has been emptied according to
Appendix III , and seal the
connections on the front panel of the device. To seal the connections, simply insert the red plugs that
were supplied with the device into their respective bulkheads and place the plastic caps on the
hydrogen outlet and vent line. Ensure the device is transported in an upright position, and that an
indicator for this is clearly visible on the outside of the packaging.
Attention!
Enapter may not accept the device if returned without the original shipping boxes or
equivalent for safe transport. If damage occurs during the return of a device under
warranty, Enapter will not cover the costs of repair.