Page 12
If you have decided to use the inViu pro portal instead of inViu web, then there are addi-
tional automatic alerts in case
The battery is low
The device is not sending any still-alive-reports anymore
6.2
Detection of timber theft
There are two options to detect timber theft:
6.2.1
Motion sensor
Both devices have a so-called 3D G-sensor, sometimes also called motion sensor or
shock sensor.
If these sensors detect some motion or shock (e.g. because the timber is loaded on
a truck or because a truck is moving), then the device will send appropriate infor-
mation to the web portal and the web portal will then send an alert to the prede-
fined email address or SMS phone number.
6.2.2
Geofence
A geofence is a virtual fence around some geographic area. Such a geographic area
can be for example the area where the timber is stored until it is picked up.
You can create an unlimited number of geofences by simply drawing them on the
inViu web map. Each time one of the devices enters or leaves such a geofence area
you, will be immediately notified by email or SMS.
