Sensational spinner!
Six specially textured pads reward the user with different sensory
stimulation: vibration, two melodies & a buzzer, a popcorn ball
popper, rainbow and other lights. The busy box spins on a Lazy
Susan base. All pads respond to the slightest touch.
Size: 12"D x
6½"H. Requires 6 AA Batteries.
Operation:
1.
The Textured Carousel Busy Box requires 6”AA” size batteries.
Use alkaline batteries only (e.g. Duracell or Energizer brand).
Do not use rechargeable batteries or any other type of batteries
because they supply lower voltage and the unit will not perform
properly. Never mix old and new batteries together or different
brands or types together.
2.
The battery compartments are located on the underside of the
unit. To install the batteries, turn the Carousel over and remove
the small Phillips head screws from the black battery cases. Next
slide the covers off.
3.
Install the AA batteries, following proper (+) & (-) battery
polarity. Replace covers and screws. Mounted on a Lazy Susan
base allows users the ability to spin the Carousel for easy access
to all of the sensory plates.
4.
Press any one of the six colored plates to activate one of the
following: vibration and popcorn balls, melody & lights, rainbow
lights and popcorn balls, buzzer, lights & popcorn balls or
rainbow lights & melody.
5.
Each of the sensory stimuli will only remain activated as long as
pressure is maintained on the corresponding colored plate. Once
you release the plate the stimuli will stop.
Troubleshooting:
Problem:
The units sounds melodies or lights fails to operate, or
operates incorrectly.
Action:
Check all “AA” batteries making sure they are installed
with proper (+) & (-) battery polarity.
Action: Check that all batteries are fresh, if not replace with
new batteries.
Problem:
One plate seems to be stuck / jammed.
Action:
visually inspect the switch plate area, making sure there is
nothing obstructing or blocking the plate from moving freely.
Care of Unit:
The Carousel Busy Box can be wiped clean with any household
multi-purpose cleaner or disinfectant. Use caution not to get
cleaning fluid or any liquid under the plate areas.
Do not submerge
the unit, as it will damage the electrical
components.
Do not use abrasive cleaners,
as they will scratch the surface of the
unit.
Do not jam
the plates in with force, as this may damage that
component.
